TA Minus (Total Alkalinity)

TA Reducer Information

TA Reducer is used to decrease the total alkalinity (TA) of pool water. Ideal pool water conditions exist with a total alkalinity between 80–150 ppm.

Use  this acid product for fast and effective TA reduction without increasing sulphate levels. Please read instructions on the product before use. For more information on chemicals and water treatment, there are documents and downloads available in our Resources section.

Key Features

• TA reduction
• Fast acting
• Won’t increase sulphate levels
• Ideal TA Range: 80–150 mg/l (ppm)

Total alkalinity is a measure of the water's ability to resist pH change.

Application Instructions

1. Pre dissolve the product, but only poor solution in a small spot in the deep end of the pool, preferably near any inlets where the circulation is good.
2. After completing the treatment wuth a minium of 8 hrs, test and adjust the pH level if necessary.

Important: This product should be handled with care. It is advised to wear goggles, gloves, and a mask respirator during use.