Halo Cartridge Cleaner

Halo Cartridge Cleaner 1L

Use Halo Cartridge Cleaner 1L to clean clogged spa filter cartridges by removing oils, grease and scale, improving circulation and helping maintain better water quality.

Why Use The Halo Cartridge Cleaner 1L?

Over time, hot tub and spa filter cartridges start to clog up with oils, grease and scale from regular use. When that happens, water flow gets restricted and the filter has to work a lot harder, which can lead to poor water quality and extra strain on the circulation system. In more serious cases, a blocked cartridge can even cause the pump to shut down.

Halo Cartridge Cleaner 1L helps break down this build-up and refresh the filter, bringing performance back to normal and helping maintain cleaner, healthier spa water.

How To Use The Halo Cartridge Cleaner 1ltr?

• 1. Remove cartridge from spa and hose off any loose debris.
• 2. Fill a clean plastic bucket, large enough to completely immerse the cartridge element, with clean water.
• 3. Add 1 litre of Cartridge Cleaner for every 20 litres of water in the bucket.
• 4. Carefully immerse the cartridge element in the solution and allow it to soak overnight or for at least 8 hours.
• 5. Remove cartridge element from the solution and rinse thoroughly with fresh water. 

Tip: For best results allow the cartridge element to dry before returning it to service.

Frequently Asked Questions

When Should I Use The Halo Cartridge Cleaner 1L?

As part of regular maintenance, spa filters should be cleaned roughly every two weeks. If the spa is used heavily or by several people, it’s worth doing it more often. Keeping on top of it helps maintain good flow through the system and prevents the filter from becoming heavily clogged.

How long should I leave the cartridge to soak?

For best results, allow the cartridge to soak overnight or for at least 8 hours. This gives the solution time to break down oils, grease and scale build-up within the filter.

Can I use the cartridge straight after cleaning?

Yes, once the cartridge has been rinsed and is free from any cleaner residue, it can be put straight back into the spa. For best performance, allowing it to dry fully before reuse is recommended where possible.

Can I use this on all spa filter cartridges?

Yes, it is suitable for most standard hot tub and spa cartridge filters. Always check your manufacturer’s guidance if you are unsure about compatibility.

Important note: Please refer to the product label for full usage instructions.