JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.
Customer Service: [email protected]
Automatic Pool Cleaners
An automatic pool cleaner helps collect debris and sediment from swimming pools and saves you time having to clean the pool yourself. There are various different types of pool cleaners out on the market and this guide will help you decide which type is the best option for your swimming pool.
Suction pool cleaners are used in conjunction with the filtration system attaching to the skimmer via a Kornea Vacuum Plate (Certikin Skimmer only) or vacuum point. This type of cleaner sucks the dirt and debris directly into your skimmer basket through to your filter. If you have a vacuum point, we would advise that you have an in-line leaf canister to protect the pump basket which is the last point of call. Suction cleaners also act as a scrubber to your pool, scrubbing away any dust that may be sitting on the pool floor and walls.
Booster Pump Cleaners are worked off pressure, usually made by a Booster Pump. This will enable the cleaner to work around the pool gathering debris into its filtration bag along the way. By having its own filter bag, it will put less stress on your filter which will ultimately be prolonged.
Driven by its own motor, the Robotic Cleaner offers extremely efficient cleaning with a self contained filter bag relieving the stress on your filtration system. The filter bag itself works to a very small micron enabling it to not only pick up debris, but to also filter dirty particles within the water. A cord and transformer are also supplied with the cleaner which converts the electricity to a low voltage allowing it to operate self sufficiently. A pool cleaner such as the M5 Dolphin is equipped with a remote control device enabling you to manoeuvre the cleaner around the pool as you wish.
A full range of Automatic Pool Cleaners can be found on our Cleaning & Maintenance page.
If you are having trouble deciding what cleaner would best suit your pool, please dont hesitate to contact us, we have a technical support team ready and waiting to assist you.
Here are a few tips on the most frequent issues that can occur with your Suction or Pressure Pool Cleaners.
If your cleaner has stopped running, check your filter Pressure Gauge. Should it read low filter pressure, be sure to inspect the pump basket for any sign of debris that could be obstructing the flow. For high pressure, simply backwash your filter. Inspect your pool cleaner and hose for blockages by manually taking it apart.
Pressure Pool Cleaners such as the Polaris 3900 Sport have a filter screen at the wall attachment which occasionally needs cleaning. It will also be worth browsing the hose for any sign of air leaks which can cause the cleaner to become sluggish or stop completely, ensuring the Wheel bearings, Tires and Tracks are securely fitted.
Unlike Pressure Pool Cleaners, Suction Pool Cleaners are driven through a diaphragm to deliver locomotion. The Super G+ for example contains a diaphragm which should be inspected for any sign of debris, splitting and deformation. Replacement heavy duty diaphragms can be found on our Spares Page.
Having more than one suction line can also reduce the cleaners suction. Try isolating these lines via the valve, this can usually be found before the pumps entry.
If your cleaner has a designated Speed Controller, adjust the dial to increase the flow ensuring the arrow is pointing towards the pool.
This is usually a result of the hose being coiled for a long period of time creating a memory. Simply lay the hose out in a straight line for a few hours in the sun to help mould it to its original pattern.
If you are still having difficulties with your Pool Cleaner, please dont hesitate to contact us, we have a technical support team ready and waiting to assist you.
