Spa Time Pipework Cleaner 1L

Spa Time Pipework Cleaner 1L

Spa Time Pipework Cleaner 1L is designed to give your hot tub or spa pipework a thorough deep clean before changing the water.

Over time, impurities and deposits can build up inside the pipework where they aren't always visible. This build-up can use up disinfectant and make it harder to maintain clean, well-balanced spa water. Regular pipework cleaning helps remove these hidden deposits and keeps your spa's circulation system clean.

Why Use Spa Time Pipework Cleaner?

• Deep cleans hard-to-reach spa and hot tub pipework
• Helps remove built-up deposits and impurities
• Helps your regular water treatment work effectively
• Ideal for use before draining and refilling your spa
• Simple granular treatment
• 1L container

How to Use

Use 200g per m³ of spa water before changing the water.

Add the required amount to the filter cartridge or suitable dosing device and allow the circulation pump to run for approximately 5 minutes.

If this isn't possible, dissolve the granules in a bucket containing approximately 5 litres of water and add directly to the spa while the pump is running.

Leave the treatment to work for approximately 1 hour, then briefly run the circulation system again. Drain the spa completely and rinse thoroughly with clean water before refilling.

Do not use the spa while the treatment is taking place.

Important Information

• Never mix with other chemicals, cleaning products or chlorine products.
• Do not add to a skimmer containing chlorine or bromine tablets.
• Use in a well-ventilated area, preferably outdoors.
• Wash hands after use.
• Replace and securely close the lid after use.
• Store in a cool, dry place.