Indux E300

Indux E300 - Self Contained

Indux E300 (HR300) - The E300 unit incorporates 2 specially developed mixed flow fans for low noise and efficiency, with up to 70% heat recovery.

Effectively lowering internal relative humidity the E300 unit controls condensation and eliminates mould growth. Designed for through the wall mounting.

Fresh, pre-warmed air from outside is continually provided to the room with simultaneous extraction of stale moist air and smells. Heat is transferred via a unique plastic heat exchanger from outgoing air to the fresh air supply with no cross contamination, maintaining internal temperatures and providing a fresh environment.The unit is fully controllable for speed using a small dedicated speed controller.

• Automatic ON/OFF control or switching to boost is easily achieved using sensors/timers e.g. humidistat.
• For summer operation the heat exchanger can be removed and replaced with a plastic divider board to provide positive cooling to rooms.
• The HR300 unit requires a 380mm x 280mm hole.
• Units should be level and square in the wall.
• The unit should be fitted so that it overhangs by minimum of 50mm on the inside, and a minimum of 70mm on the outside.
• An extension sleeve is available for walls up to 650mm thick